 |
|
|
Do not use the measurement of
your existing spa cover or the measurements shown in your spa manufacturer's
brochure. Age, weather and foam distortion can effect your measurement accuracy.
Instead, take the measurements of the outside dimensions of the spa shell as shown above.
Each
edge that is a different length will be Dimension A,
B, C, D or E to be filled in on the
spa
cover order form.
If your spa has rounded corners, you will also need to take a
Radius measurement.
|
|
|
|
Measure each requested dimension in inches at the
widest point. Round up each measurement to the
nearest quarter inch. If a cover is slightly
large, it will probably work well. If it’s a smidge too
small, it will not work as well.
Check your cover dimensions and your
fold orientation with your actual spa. All spa
covers are custom-made so if you are unsure,
contact us before
ordering. |
|
|
|
You may decide to measure for a skirt or FLAP to cover the lip of
your spa (typically 4"-5"). 4.5" is standard.
Note that not all spas have an acrylic/fiberglass lip.
|
|
|
|
Please
note: Contact
us as shown above if the following applies: |
 |
|
|
|
° |
Your spa cover requires cut-outs or hoods for speakers
or hand rails. |
|
° |
Your spa cover
measures larger than 96" in any direction. |
|
° |
Your cover is not completely flat on the
bottom. |
|
° |
Your cover shape not shown or listed. |
|
° |
Other special conditions |
|
Disclaimer/Return Policy: Carefree Spas guarantees
that we will order your
custom spa cover according the measurements you give us. Carefree Spas will not
accept returns on covers that are measured or ordered incorrectly. We will
call you to confirm your measurements and order specifications.
 |
